Skip to content

Reiwa Embedded Systems and Electronics

  • Home
  • FPGAs
    • Ultra96-V2 Zynq Ultrascale+ MPSoC Board
    • Kintex-7 KC705 Board
  • Single Board Computers (SBC)
    • Raspberry Pi 4
    • Qualcom DragonBoard
  • Yocto Embedded Linux
  • Electronics and PCBs
  • Projects
  • Blogs

Category: Yocto Embedded Linux

Ultra96-V2 Zynq UltraScale+ MPSoC Custom Image Build [Part 2]: Petalinux Approach

by

Objective: This article will present the Petalinux approach of building custom images for the Ultra96-V2 board. It will utilize hardware design files built on Vivado from the previous article. Recommended Prerequisite articles to read i) Ultra96-V2 Zynq UltraScale+ MPSoC Custom Image Creation (Part 1): Hardware Generation In the previous article, we generated the hardware design …

Continue Reading

Custom Raspberry Pi Image Build with Yocto

by

Objective: This writeup will guide you on how to create a custom minimal image for Raspberry Pi 4 board using the Yocto build tool. More capability and flesh will be added to the image in subsequent writeups. Recommended prerequisite articles to read: Yocto: Environment Set-up and Initial Build In this writeup, we will explore building …

Continue Reading

Yocto: Environment Set-up and Initial Build

by

Objective: This article presents the system requirements for Yocto development. A physical computer set-up is presented that the author has found highly productive. An initial Yocto build process is presented step-by-step that results in a QEMU capable image. Recommended prerequisite articles to read: Yocto: Embedded Linux Its public secret that the Yocto development approach is …

Continue Reading

Yocto: Embedded Linux

by

Objective: This article presents a brief introduction on some aspects of Embedded Systems and to set the ground for the beginning of Yocto Embedded Linux development. Recommended prerequisite article to read: None Introduction As an Embedded Systems engineer or enthusiast, a common progression would involve a combination of any of the following: Baremetal development for …

Continue Reading

Recent Posts

  • Home PCB Assembly (Toaster Oven)
  • Dish Antenna Rotator[part 3]: Integration
  • Dish Antenna Rotator [part 2]: Assembly
  • Dish Antenna Rotator [part 1]: Design Concept
  • Ultra96-V2 Zynq UltraScale+ MPSoC Custom Image Build [Part 2]: Petalinux Approach
  • Ultra96-V2 Zynq UltraScale+ MPSoC Custom Image Build [Part 1]: Vivado Hardware Generation
  • Raspberry Pi – Yocto WiFi configuration for automatic connection at boot
  • Custom Raspberry Pi Image Build with Yocto
  • Ultra96-V2 Vivado and Vitis Development Workflow

Archives

  • September 2020 (1)
  • July 2020 (1)
  • April 2020 (2)
  • March 2020 (2)
  • February 2020 (2)
  • January 2020 (1)
  • November 2019 (4)
  • September 2019 (1)
  • May 2019 (1)
© 2021 Reiwa Embedded Systems and Electronics | WordPress Theme by Superbthemes